EdilKamin Iris Plus Specifications download pdf (Page 15)

PELLET STOVE SPECIFICATIONS FOR IRIS PLUS

INDEX

Miscellaneous and safety information p. 14

Description and fuel p. 15

Exploded view with spare part code numbers p. 74-75

Technical specifications, distance between holes and wiring diagram. p. 16

Assembly and installation (TAC) p. 17

Dimensions and covering assembly p. 19

Interface p. 20

Operation

Before ignition p. 20

Ignition and screw feeder loading p. 21

Operating modes: manual/ automatic p. 21

Switching off p. 21

Turning on and off with timer (only for IRIS with programmer) p. 22

Advice in the event of problems p. 23

Servicing: routine and annual (TAC) p. 25

Optional extras p. 25

Regulations p. 25

Installation accessories p. 80

Dear Sir or Madam,

thank you for choosing our Iris Plus stove.

Before using your stove, please read this booklet carefully: it explains how to get the most from all its features in complete safety.

Please remember that the 1st ignition must be carried out by a TAC (authorized technical assistance centre), which verifies the installation and com-

pletes the guarantee.

The manufacturer cannot be held liable for any damage which may derive from using the stove after incorrect installation, incorrect maintenance or

misuse.

SAFETY INFORMATION

The stove is designed to heat the room it is installed in by radiation and by air movement from the front grilles. The

heat is generated by automatic pellet combustion in the firebox.

The only risks which may derive from use of the stove are linked with non-compliance with the installation instruc-

tions, direct contact with live electrical parts (inside) or with the fire or hot parts (glass, pipes and hot air outlet), and

the introduction of foreign substances. Only use pellets as fuel.

If components fail, the stove is fitted with safety devices which turn it off. This must be allowed to happen without

interference.

For correct operation, the stove must be installed in compliance with the instructions on page 6 and the door must not

be opened while running: combustion is managed automatically so no manual operations are needed.

Never put foreign substances in the firebox or hopper.

Do not use flammable products to clean the smoke duct.

Firebox and hopper components must only be cleaned using a vacuum cleaner.

The glass must be cleaned when COLD with a special product (e.g. GlassKamin) and cloth. Do not clean when hot.

Make sure the stove is installed and ignited by an authorized TAC (technical assistance centre), which must also com-

plete the guarantee and take responsibility for correct installation.

During stove operation, the outlet pipes and door reach high temperatures.

Do not keep objects which are not able to withstand heat in the immediate vicinity of the stove.

NEVER use liquid fuels to light the stove or rekindle the embers.

Do not block ventilation openings in the room where the stove is installed or air inlets in the stove itself.

Do not get the stove wet, and do not put wet hands near electrical parts.

Do not fit reducers on the smoke outlet pipes.

The stove must be installed in a suitable place as regards fire safety

, and provided with all the facilities (power supply

and outlets) it requires for correct safe operation.

Before carrying out any maintenance, disconnect the device from the mains power supply

ENGLISH

sk tecnica irisplus multilingua_def.qxp 08/10/2008 14.23 Pagina 15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 79 80

Comments to this Manuals

No comments

EdilKamin Iris Plus Specifications Page 15

Comments to this Manuals

Related products and manuals for Cookers EdilKamin Iris Plus